4 mm² to AWG
12 AWG (4 mm²) is the workhorse of 15–25 A DC circuits. It is the gauge most camper builders pick for the water pump, vent fan, and USB charger branches — heavier than the 14 AWG lighting circuit, lighter than the 10 AWG fridge feed. In 12V automotive applications it is the standard for accessory sockets, electric awnings, dual-purpose Maxxair fans, and small inverter feeds up to roughly 300 W. The metric pair is 4 mm², stocked in every auto-electrical shop in Europe.
All values on this page assume copper conductors at 20°C ambient. Aluminum has ~60% higher resistance for the same cross-section and is generally not recommended for low-voltage DC.
Calculate for your specific cable run
The tables below assume 12 AWG (4 mm²) copper. Use the calculator to confirm this gauge is correct for your exact load and length, or get a different gauge recommendation if needed.
= 60W
= 16.4 ft (one way, round-trip calculated automatically)
Advanced Settings
Result
Fuse Size
Need a complete wiring diagram?
VoltPlan designs full electrical systems for campers, boats, and off-grid setups with automatic wire sizing, fuse placement, and solar configurations.
Design Your SystemWire sizing on the go?
Cable by VoltPlan is our iOS app for quick DC wire sizing, fuse recommendations, and AWG/mm² conversions -- right in the hardware store.
Download Cable for iOS12 AWG Voltage Drop at 12V DC
Round-trip voltage drop for 12 AWG (4 mm²) copper wire at 20°C ambient. Cells highlighted in yellow exceed the 3% target; red cells exceed 5% and are not recommended.
| Current | 1 m / 3 ft | 3 m / 10 ft | 5 m / 16 ft | 7 m / 23 ft | 10 m / 33 ft |
|---|---|---|---|---|---|
| 5 A | 0.045 V (0.37%) | 0.13 V (1.11%) | 0.22 V (1.86%) | 0.31 V (2.60%) | 0.45 V (3.72%) |
| 10 A | 0.089 V (0.74%) | 0.27 V (2.23%) | 0.45 V (3.72%) | 0.62 V (5.20%) | 0.89 V (7.43%) |
| 15 A | 0.13 V (1.11%) | 0.40 V (3.35%) | 0.67 V (5.57%) | 0.94 V (7.80%) | 1.34 V (11.15%) |
| 20 A | 0.18 V (1.49%) | 0.54 V (4.46%) | 0.89 V (7.43%) | 1.25 V (10.41%) | 1.78 V (14.87%) |
| 25 A | 0.22 V (1.86%) | 0.67 V (5.57%) | 1.11 V (9.29%) | 1.56 V (13.01%) | 2.23 V (18.58%) |
12 AWG Voltage Drop at 24V DC
Round-trip voltage drop for 12 AWG (4 mm²) copper wire at 20°C ambient. Cells highlighted in yellow exceed the 3% target; red cells exceed 5% and are not recommended.
| Current | 1 m / 3 ft | 3 m / 10 ft | 5 m / 16 ft | 7 m / 23 ft | 10 m / 33 ft |
|---|---|---|---|---|---|
| 5 A | 0.045 V (0.19%) | 0.13 V (0.56%) | 0.22 V (0.93%) | 0.31 V (1.30%) | 0.45 V (1.86%) |
| 10 A | 0.089 V (0.37%) | 0.27 V (1.11%) | 0.45 V (1.86%) | 0.62 V (2.60%) | 0.89 V (3.72%) |
| 15 A | 0.13 V (0.56%) | 0.40 V (1.67%) | 0.67 V (2.79%) | 0.94 V (3.90%) | 1.34 V (5.57%) |
| 20 A | 0.18 V (0.74%) | 0.54 V (2.23%) | 0.89 V (3.72%) | 1.25 V (5.20%) | 1.78 V (7.43%) |
| 25 A | 0.22 V (0.93%) | 0.67 V (2.79%) | 1.11 V (4.65%) | 1.56 V (6.50%) | 2.23 V (9.29%) |
What is 12 AWG (4 mm²) used for?
Camper / RV applications
- Water pumps (Shurflo 4008, Whale Universal, 7–10 A continuous, 15–20 A surge)
- 12V cigarette sockets and 12V accessory outlets
- Maxxair / Fiamma roof vents on high speed (8–10 A)
- Small inverter feeds up to 300 W at 12V (~25 A)
- Compressor cooling fan branches
Boat / marine applications
- Electric heads (toilet macerators, 12–20 A surge)
- Anchor windlass remote and accessory feeds
- High-output cabin LED arrays
- VHF radio and chartplotter combined feeds
- Engine-room ventilation fans
Off-grid / solar applications
- Branch circuits in tiny homes (lighting + outlets combined)
- DC water pumps for off-grid plumbing
- Garden shed and workshop sub-feeds
- Solar charge controller to battery on 15–25 A systems
- Sub-panel branch feeders
When to step up
- Continuous current above 20 A — within 20% of ampacity
- Inverter feeds above 300 W at 12V (~25 A)
- Cable runs longer than 4 m at 12V with currents above 15 A
- Motor loads with inrush above 30 A (use 10 AWG to absorb the spike)
Fuse size for 12 AWG (4 mm²)
The fuse must protect the wire, not the load. For 12 AWG copper (4 mm²) the maximum fuse rating is 25 A. Below this ceiling, size the fuse at 125% of your continuous load current and round up to the next standard fuse size.
| Continuous Load | 125% Calculation | Recommended Fuse | Fuse Type |
|---|---|---|---|
| 2 A | 2.5 A | 5 A | Blade (ATC) |
| 5 A | 6.25 A | 7.5 A | Blade (ATC) |
| 8 A | 10 A | 10 A | Blade (ATC) |
| 10 A | 12.5 A | 15 A | Blade (ATC) |
| 21 A | 26.25 A | 25 A | Blade (ATC) |
Related conversions
Frequently Asked Questions
What is 4 mm² in AWG?
4 mm² is the metric pairing for 12 AWG in international cable standards. The precise AWG value is between 11 AWG (4.17 mm²) and 12 AWG (3.31 mm²) — closer to 11 AWG. In practice, 4 mm² and 12 AWG are interchangeable in datasheets and stocked side-by-side in auto-electrical shops.
How many amps can 4 mm² handle?
4 mm² copper cable is rated for 25 A continuous at 20°C in chassis wiring — the same ampacity as 12 AWG. This is the standard branch-circuit gauge for water pumps, USB outlet runs, and accessory sockets in camper and boat builds.
Is 4 mm² enough for a water pump?
Yes for typical camper water pumps drawing 7–10 A continuous. 4 mm² handles both the continuous draw and the 15–20 A startup inrush without significant voltage drop on cable runs up to 5 m. For larger pumps over 12 A continuous, step up to 6 mm² (10 AWG).
What size fuse for 4 mm² wire?
Maximum fuse for 4 mm² is 25 A. Below that ceiling, size the fuse at 125% of continuous load and round up to the next standard fuse: 10 A load → 15 A fuse, 15 A load → 20 A fuse, 20 A load → 25 A fuse.