In libraryVatrer
12.8V 460Ah Self-Heating LiFePO4 RV Battery
The Vatrer 12.8V 460Ah is a LiFePO4 battery with a 5888Wh energy capacity and a 300A BMS. This model features a self-heating function to enable charging in cold temperatures.
Buy — affiliate linkAdd to my wiring diagram
We earn a small commission on purchases through this link. It does not change what you pay and never affects ratings.
Capacity
460 Ah
Energy
5888 Wh
Voltage
12.8 V
Chemistry
LiFePO4
!
Safety notes for this component
- Charging must not occur below 32°F without the self-heating function engaged, which requires an active charging source.
- Do not exceed the maximum continuous charge or discharge currents of 300A.
- Ensure all connections are secure and terminals are clean to prevent overheating.
- Do not use chargers not specifically designed for LiFePO4 batteries.
- Avoid operating the battery in environments with strong acids, alkalis, excessive dust, or corrosive gases.
Try it with your setup
How long it runs
From 4710 Wh usable of 5888 Wh, one load at a time.
| LED lighting | 15 W | 13.1 days |
| Compressor fridge (average draw) | 45 W | 4.4 days |
| Diesel heater, running | 30 W | 6.5 days |
| Water pump | 65 W | 3 days |
| Laptop and router | 75 W | 2.6 days |
| Kettle through an inverter | 1200 W | 3.5 h |
| Your load | — |
80 % depth of discharge for this chemistry; the kettle row includes about 10 % inverter loss. Averages for a running device; a fridge cycles, so real days vary with the weather.
Combine loads in the battery runtime calculator for the 12.8V 460Ah Self-Heating LiFePO4 RV Battery →Technical data
Battery ModelLiFePO4 Battery 12.8V 460Ah Self-heating
Nominal Voltage12.8V
Charge Voltage14.2V - 14.6V
Weight104.7 lbs / 47.5 kg
Energy5888Wh
Max Continuous Charging Current300A
Max Continuous Discharging Current300A
Recommend Charge Current92A (0.2C)
Charge Operating Temperature Range-20°C to 50°C (-4°F to 122°F)
Discharge Operating Temperature Range-20°C to 60°C (-4°F to 140°F)
Storage Operating Temperature Range-10°C to 50°C (14°F to 122°F)
Low temp cut off protection (Discharge)-20°C ± 4°C (-4°F ± 7.2°F)
Max Load / Inverter Power3,840W
Terminal TypeM8
Waterproof ClassIP65
Connections in Series/Parallel4 in Series, and no more than 10PCS in Parallel
Dimension18.78 x 10.75 x 9.92 inches / 477 x 273 x 252 mm
Cycle Life≥5000 Cycles
Alternatives

ECO-WORTHYLiFePO4 Battery 314AhThe ECO-WORTHY EnergyTrek 12V 314Ah is a lithium iron phosphate (LiFePO4) battery with a nominal capacity of 314Ah, providing 4019Wh of energy. It features Bluetooth monitoring, a 200A BMS with comprehensive protection, and is designed for all-season operation.
- Capacity
- 314 Ah
- Energy
- 4019 Wh
- Voltage
- 12.8 V
- Chemistry
- LiFePO4

LiTimeLiFePO4 Battery 300AhThe LiTime 12V 300Ah is a LiFePO4 battery with 3840Wh of energy and a 200A BMS for continuous charge and discharge current. It is rated for 4,000 cycles at 100% depth of discharge (15,000 at 60%), IP65, and up to four units in series and four in parallel (4S4P).
- Capacity
- 300 Ah
- Energy
- 3840 Wh
- Voltage
- 12.8 V
- Chemistry
- LiFePO4

RenogyCore Mini 12.8V 200Ah LiFePO4 Battery with Low-Temperature Protection (RBT12200LFP-M)Renogy Core Mini is a 12.8 V, 200 Ah (2560 Wh) LiFePO4 battery in a compact IP65 case (384 × 194 × 253 mm, 19.25 kg). It allows 100 A continuous charge, 200 A continuous discharge and 380 A peak for 10 s, and its BMS blocks charging below 0 °C. Rated for 5000 cycles at 80 % depth of discharge.
- Capacity
- 200 Ah
- Energy
- 2560 Wh
- Voltage
- 12.8 V
- Chemistry
- LiFePO4

GenericLiFePO4 Battery 100Ah100 Ah LiFePO4 house battery for 12 V systems. Roughly 1280 Wh nominal, usable to a far deeper depth of discharge than lead-acid, at about a third of the weight.
- Capacity
- 100 Ah
- Energy
- 1280 Wh
- Voltage
- 12.8 V
- Chemistry
- LiFePO4
★★★★☆(1)
Ratings & reviews
No ratings yet — be the first to rate this component.
Sign in to rate and comment
Free account — also saves your wiring diagrams.
Drop the 12.8V 460Ah Self-Heating LiFePO4 RV Battery into your wiring diagram
VoltPlan sizes the cables, picks the fuses and checks the voltages for every component you connect around it.