It's even better as an app.$3.99 $1.99 · Pay once, no subscriptionDownload on the App Store

Battery Charge Time Calculator

Ah

round-trip eff 95%

A

= 240 W charge power · 0.20C rate

20%
Advanced settings

Charge Time

Charge rate is comfortable for this chemistry.
Total Charge Time
4 h 25 min
Bulk Phase
4 h 13 min
CC, fast
Absorption Phase
13 min
CV, taper

1011 Wh to add @ 240 W charger

Next steps

Plan the charging in a wiring diagram

Opens the free editor with your 100 Ah 12 V battery already placed. Add your charger and VoltPlan sizes its cable and fuse.

20 A battery chargers for 12 V

Models with this charge current.

Show models

Affiliate link — at no extra cost to you.

How long will it last?

The battery runtime calculator starts with your 100 Ah: add your loads and see the hours.

Total
4 h 25 min
Bulk
4 h 13 min
Bank
100Ah
Charger
20A

Recommended Charge Rates by Chemistry

Maximum and recommended charge currents as a fraction of nameplate capacity (C-rate). Higher is faster but trades cycle life. The calculator flags rates outside the recommended band.

ChemistryRecommendedMaxAbsorption phase
LiFePO40.5C1.0C (BMS-dependent)~5% of bulk
AGM0.2C0.3C~20% of bulk
Gel0.2C0.3C~20% of bulk
Flooded lead-acid0.1–0.15C0.2C~25% of bulk

Frequently Asked Questions

How long to charge a 100Ah LiFePO4 from 20% to 100%?

With 20A AC charger: 4–5 hours. With 50A DC-DC: ~2 hours. With 200W solar at 5 sun-hours/day: ~1.5 days. Use the calculator above for your specific charger and chemistry.

Bulk vs absorption phase?

Bulk = constant-current, fast. Absorption = constant-voltage, taper, finishes the last 5–25% depending on chemistry. LiFePO4 has very short absorption; lead-acid types need much longer.

What is the safest charge rate for LiFePO4?

0.5C is the comfortable default (50A on a 100Ah battery). Most BMSs cap at 1.0C. Always check the spec sheet — some cheaper drop-ins limit to 50A regardless of capacity.

Why does the calculator show charge losses?

Energy in > energy stored. LiFePO4 round-trip is ~95%; lead-acid ~80%. The calculator divides the energy to replace by the efficiency to give a realistic charge time.

How accurate is the solar sun-hours model?

Sun-hours is an industry-standard way to model average daily solar output. It is conservative — actual output varies with weather, panel angle, and shading. Use 4–5 sun-hours for temperate climates, 5–6 for sunny ones.

Can I parallel two chargers to charge faster?

Yes, as long as the total current stays within the battery and BMS limit. Two 30A chargers in parallel is equivalent to one 60A charger. Match the absorption voltage on both to avoid one finishing early.

Related Calculators