In librarySterling Power Pro Combi S+ 12/1600
The Sterling Power Pro Combi S+ 12/1600 is a 1600W pure sine wave inverter/charger. It operates on a 12V DC input and provides a 230V AC output. The unit features a built-in battery charger and AC transfer switch.
We earn a small commission on purchases through this link. It does not change what you pay and never affects ratings.
among the cheapest of 3 inverter-chargers in the catalogue (€45–€125 per 100 W).
Estimated street price; the shop shows today's price.
Safety notes for this component
- DC cable must be connected to the battery first, with the appropriate fuse connected, before connecting to the inverter/charger.
- Protect DC and AC wires with the appropriate sized fuse; the DC fuse should be as close to the battery as possible.
- Ensure reverse polarity and short circuiting are avoided to prevent damage to the battery.
- Install the device in a well-ventilated space and do not cover or obstruct ventilation openings.
- Connect AC output to a Residual Circuit Breaker (RCD) and current overload trips.
Try it with your setup
What it runs
Against 1600 W continuous and 3200 W surge, one appliance at a time.
| Laptop charger | 65 W | Runs |
| Starlink dish | 75 W | Runs |
| 230 V compressor fridge | 100 W | Runs |
| Corded power drill | 600 W | Runs |
| Hair dryer | 1200 W | Runs |
| Microwave (input power) | 1200 W | Runs |
| Pod coffee machine | 1400 W | Runs |
| Induction hob, one zone | 2000 W | Too big |
| Kettle | 2000 W | Too big |
Start-up draw from the appliance type: compressor fridges pull about 5× their running power, motors 3×, pumps 4×.
Size an inverter for several appliances at once →Wiring it in
Current, fuse and cable size for the Sterling Power Pro Combi S+ 12/1600 at full rated power.
Battery → inverter
DC input · 12 V| Cable run (one way) | Cable | Voltage drop |
|---|---|---|
| 1 m | 95 mm² · 3/0 AWG | 0.5 % |
| 2 m | 95 mm² · 3/0 AWG | 1 % |
| 3 m | 95 mm² · 3/0 AWG | 1.5 % |
| 5 m | 95 mm² · 3/0 AWG | 2.5 % |
Copper cable at 20 °C, positive and negative conductor, at most 3 % voltage drop. The cable is always rated for the fuse that protects it, and the fuse is sized at 125 % of the current. Input current assumes 85 % conversion efficiency. If the manufacturer manual specifies a fuse or cable, follow the manual.
Technical data
Alternatives

- Power
- 2000 W
- Surge
- 4000 W
- Input
- 12 V DC
- Output
- 230 V AC

- Power
- 2000 W
- Surge
- 4000 W
- Input
- 12 V DC
- Output
- 230 V AC

- Power
- 2000 W
- Surge
- 4000 W
- Input
- 12 V DC
- Output
- 230 V AC

- Power
- 2000 W
- Surge
- 4000 W
- Input
- 12 V DC
- Output
- 230 V AC
Ratings & reviews
Drop the Sterling Power Pro Combi S+ 12/1600 into your wiring diagram
VoltPlan sizes the cables, picks the fuses and checks the voltages for every component you connect around it.