In libraryBLUETTI
BLUETTI Elite 200 V2
The BLUETTI Elite 200 V2 is a portable power station with a 2073.6Wh LiFePO4 capacity and a 2600W AC output. It can be recharged via AC input up to 2300W or by solar panels up to 1000W.
Buy — affiliate linkAdd to my wiring diagram
We earn a small commission on purchases through this link. It does not change what you pay and never affects ratings.
Power
2600 W
Surge
3900 W
Output
230 V AC
!
Safety notes for this component
- Do not use solar panels with an open-circuit voltage higher than 60V; solar input range is 12V-60V, 20A max (10A max per MC4 input).
- Do not plug the unit's AC charging cable into its own AC outlets.
- Power Lifting mode is only for pure resistive loads rated 2,600W-3,900W; motors or compressors may start at 2-4× their rated power and overload the unit.
- Do not move the product during operation, and do not use it in rain or high-humidity environments.
Technical data
Battery Capacity2,073.6Wh (54Ah)
Battery TypeLiFePO₄ (Lithium Iron Phosphate)
Life Cycles6,000+ cycles to 80% original capacity
Inverter TypePure Sine Wave
AC Outlets2,600W in total, 230V, 11.3A
Surge Power3,900W
DC Outlets1 × 12V/10A (Car Outlet)
USB-C Port2 × 100W Max
USB-A Port2 × 15W, 5V/3A
AC Input2,300W Max
Solar Input1,000W Max, 12V to 60V, 20A Max
Car Input96W (12V) / 192W (24V)
AC + DC Input2,400W Max
UPS Switchover Time≤15 ms
Weight24.2 kg / 53.4 lbs
Dimensions (L×W×H)350 × 250 × 323.6 mm
Charging Temperature0°C to 40°C / 32°F to 104°F
Discharging Temperature-20°C to 40°C / -4°F to 104°F
Warranty5 years
Ratings & reviews
No ratings yet — be the first to rate this component.
Sign in to rate and comment
Free account — also saves your wiring diagrams.
Drop the BLUETTI Elite 200 V2 into your wiring diagram
VoltPlan sizes the cables, picks the fuses and checks the voltages for every component you connect around it.