In libraryFlex ShadowFlux 200W Anti-Shading N-Type Flexible Solar Panel (RSP200DB-ASR-B)
Renogy Flex ShadowFlux 200W is a 2.5 mm flexible N-type solar panel with ShadowFlux anti-shading. Vmp 37.8 V, Imp 5.29 A, Voc 44.1 V, Isc 5.57 A; IP68, TPO surface, bends up to 270° along the long axis. 1580 × 696 × 2.5 mm, 3.50 kg. Intended for 12/24/36 V systems via an MPPT controller.
We earn a small commission on purchases through this link. It does not change what you pay and never affects ratings.
Safety notes for this component
- Vmp 37.8 V (Voc 44.1 V) is too high for PWM on 12 V: Renogy specifies an MPPT controller (12/24/36 V systems).
- With 44.1 V Voc, a controller limited to 50 V PV input (e.g. DCC50S) takes one panel only; never two in series.
- Max series fuse is 10 A (not 15 A); fuse each parallel string.
- Bond with neutral-cure structural silicone along the long edges, leave short edges open for drainage, keep the installed bend ≤ 30° and allow 72 h cure before driving.
Try it with your setup
What it runs
Against 200 W continuous, one appliance at a time.
| Laptop charger | 65 W | Runs |
| Starlink dish | 75 W | Runs |
| 230 V compressor fridge | 100 W | May not start |
| Corded power drill | 600 W | Too big |
| Hair dryer | 1200 W | Too big |
| Microwave (input power) | 1200 W | Too big |
| Pod coffee machine | 1400 W | Too big |
| Induction hob, one zone | 2000 W | Too big |
| Kettle | 2000 W | Too big |
Start-up draw from the appliance type: compressor fridges pull about 5× their running power, motors 3×, pumps 4×. No surge rating on file, so twice the continuous rating is assumed.
Size an inverter for several appliances at once →Technical data
Alternatives

- Power
- 200 W
- Output
- 31.3 V DC

- Power
- 175 W
- Output
- 20.88 V DC

- Power
- 100 W
- Output
- 28.8 V DC

- Capacity
- 1070 Wh
- Power
- 1500 W
- Surge
- 3000 W
- Output
- 230 V AC
Ratings & reviews
No ratings yet — be the first to rate this component.
Drop the Flex ShadowFlux 200W Anti-Shading N-Type Flexible Solar Panel (RSP200DB-ASR-B) into your wiring diagram
VoltPlan sizes the cables, picks the fuses and checks the voltages for every component you connect around it.