In library42 Series 12V 3.0 GPM 55 PSI Water Pump with Bypass (SFDP1-030-055-42)
The SEAFLO 42 Series 12V 3.0 GPM 55 PSI Water Pump is a self-priming diaphragm pump designed for continuous duty in marine, RV, and off-grid systems. It features internal bypass technology to reduce cycling and is run-dry safe. The pump operates on demand and provides a consistent flow rate at various output pressures.
We earn a small commission on purchases through this link. It does not change what you pay and never affects ratings.
Safety notes for this component
- Ensure the power supply is 12V DC and connect with proper polarity, red to positive and black to negative.
- Install an appropriate fuse (e.g., 10A) in the positive line to protect the pump.
- Use properly sized wiring to avoid voltage drop and potential fire hazards; for a 10A circuit, use at least 1.3mm² wire for distances up to 7.6 meters (round trip).
- The pump should be installed in a dry, well-ventilated area to prevent overheating, which can trigger an internal thermal breaker.
- It is recommended to use an ignition-protected switch rated for above 15 amps and ensure the pump is grounded.
Wiring it in
Current, fuse and cable size for the 42 Series 12V 3.0 GPM 55 PSI Water Pump with Bypass (SFDP1-030-055-42) at full rated power.
Battery → load
Supply · 12 V| Cable run (one way) | Cable | Voltage drop |
|---|---|---|
| 1 m | 1 mm² · 16 AWG | 2.1 % |
| 2 m | 1.5 mm² · 14 AWG | 2.8 % |
| 3 m | 2.5 mm² · 13 AWG | 2.5 % |
| 5 m | 4 mm² · 12 AWG | 2.6 % |
Copper cable at 20 °C, positive and negative conductor, at most 3 % voltage drop. The cable is always rated for the fuse that protects it, and the fuse is sized at 125 % of the current. If the manufacturer manual specifies a fuse or cable, follow the manual.
Technical data
Alternatives

- Power
- 90 W
- Input
- 12 V DC

- Power
- 113 W
- Input
- 12 V DC

- Power
- 60 W
- Input
- 12 V DC

- Power
- 42 W
- Input
- 12 V DC
Ratings & reviews
No ratings yet — be the first to rate this component.
Drop the 42 Series 12V 3.0 GPM 55 PSI Water Pump with Bypass (SFDP1-030-055-42) into your wiring diagram
VoltPlan sizes the cables, picks the fuses and checks the voltages for every component you connect around it.