In libraryTrail King 7 12V 7 l/min 20 PSI Fresh Water Pump (2095-204-412)
The Shurflo Trail King 7 is a 12 V DC 3-chamber diaphragm fresh water pump designed for multi-fixture caravan potable water installations. It has a typical flow rate of 7 LPM (1.8 GPM) and a shut-off pressure of 20 PSI (1.4 BAR).
We earn a small commission on purchases through this link. It does not change what you pay and never affects ratings.
Safety notes for this component
- Always use a 10 Amp time-delay fuse for protection.
- Ensure the pump is wired with correct polarity; red to positive (+) and black to negative (-).
- Use a switch rated at least 15 amps, interrupting current flow on the positive lead.
- The pump should be on a dedicated circuit with appropriate wire gauge based on the distance from the power source (minimum 2.5 mm² / #14 AWG recommended).
Wiring it in
Current, fuse and cable size for the Trail King 7 12V 7 l/min 20 PSI Fresh Water Pump (2095-204-412) at full rated power.
Battery → load
Supply · 12 V| Cable run (one way) | Cable | Voltage drop |
|---|---|---|
| 1 m | 0.75 mm² · 18 AWG | 1.4 % |
| 2 m | 0.75 mm² · 18 AWG | 2.7 % |
| 3 m | 1.5 mm² · 14 AWG | 2.1 % |
| 5 m | 2.5 mm² · 13 AWG | 2.1 % |
Copper cable at 20 °C, positive and negative conductor, at most 3 % voltage drop. The cable is always rated for the fuse that protects it, and the fuse is sized at 125 % of the current. If the manufacturer manual specifies a fuse or cable, follow the manual.
Technical data
Alternatives

- Power
- 36 W
- Input
- 12 V DC

- Power
- 60 W
- Input
- 12 V DC

- Power
- 84 W
- Input
- 12 V DC

- Power
- 90 W
- Input
- 12 V DC
Ratings & reviews
No ratings yet — be the first to rate this component.
Drop the Trail King 7 12V 7 l/min 20 PSI Fresh Water Pump (2095-204-412) into your wiring diagram
VoltPlan sizes the cables, picks the fuses and checks the voltages for every component you connect around it.