It's even better as an app.$3.99 $1.99 · Pay once, no subscriptionDownload on the App Store
Revolution 4008-101-E65 12V 3.0 GPM RV Fresh Water PumpIn library
Shurflo

Revolution 4008-101-E65 12V 3.0 GPM RV Fresh Water Pump

The Shurflo Revolution 4008-101-E65 is a 12V DC fresh water pump with a flow rate of 3 GPM and a maximum shut-off pressure of 55 PSI. It features a one-piece diaphragm, internal bypass, and is designed for quiet operation and long life in RV plumbing systems. The pump can run dry without damage.

Buy — affiliate linkAdd to my wiring diagram

We earn a small commission on purchases through this link. It does not change what you pay and never affects ratings.

Power
90 W
Input
12 V DC
!

Safety notes for this component

  • Ensure the 12V DC wiring is sized appropriately for the pump's current draw and wire run length to prevent voltage drop.
  • A minimum 10 Amp fused circuit is recommended for the pump's power supply.
  • Use a minimum of 16 AWG wire for connections.
  • The pump is designed for intermittent duty only and should not be used for continuous duty applications like Reverse Osmosis filtration systems.

Wiring it in

Current, fuse and cable size for the Revolution 4008-101-E65 12V 3.0 GPM RV Fresh Water Pump at full rated power.

Battery → load

Supply · 12 V
Current at rated power
7.5 A
Fuse
10 A Blade (ATC/ATO)
Cable run (one way)CableVoltage drop
1 m1 mm² · 16 AWG2.2 %
2 m1.5 mm² · 14 AWG3 %
3 m2.5 mm² · 13 AWG2.7 %
5 m4 mm² · 12 AWG2.8 %
Other length or voltage? Open the wire gauge calculator →

Copper cable at 20 °C, positive and negative conductor, at most 3 % voltage drop. The cable is always rated for the fuse that protects it, and the fuse is sized at 125 % of the current. If the manufacturer manual specifies a fuse or cable, follow the manual.

Technical data

Type4 Chamber Diaphragm pump
Ports1/2”-14 NPSM-Male
Liquid Max Temperature130 °F [54 °C]
Dry-Prime6 feet [1.82 M]
Inlet Pressure Max30 PSI [2.1 Bar]
Run DryYes
Motor12VDC Permanent Magnet, Intermittent Duty
ProtectionThermal Overload, Automatic Restart
Leads16 AWG, 10” [25 cm] Red +, 13” [33 cm] Black -
Fuse Recommended10 Amp
Shut-Off Pressure55 PSI [3.8 BAR] ± 2 PSI [0.13 BAR]
Re-start Pressure40 PSI [2.8 BAR] ± 2 PSI [0.13 BAR]
Maximum By-Pass Pressure62 PSI [4.2 BAR] ± 2 PSI [0.13 BAR]
Flow Rate3 GPM [11.4LPM]
Amps (Max)7.5
Dimensions8.1” x 4.9” x 4.3” [206 x 125 x 110mm]

Ratings & reviews

No ratings yet — be the first to rate this component.

Sign in to rate and comment
Free account — also saves your wiring diagrams.

Drop the Revolution 4008-101-E65 12V 3.0 GPM RV Fresh Water Pump into your wiring diagram

VoltPlan sizes the cables, picks the fuses and checks the voltages for every component you connect around it.