It's even better as an app.$3.99 $1.99 · Pay once, no subscriptionDownload on the App Store
MultiPlus 12/3000/120-50 120V Inverter/Charger (PMP123021102)
Victron

MultiPlus 12/3000/120-50 120V Inverter/Charger (PMP123021102)

The Victron MultiPlus 12/3000/120-50 120V is a 12V DC to 120V AC inverter/charger with a 3000 VA (2400 W) continuous output power. It features a 120A charger and a 50A transfer switch for power continuity.

Buy — affiliate linkAdd to my wiring diagram

We earn a small commission on purchases through this link. It does not change what you pay and never affects ratings.

Power
2400 W
Surge
6000 W
Input
12 V DC
Output
120 V AC
!

Safety notes for this component

  • Always switch the AC power off and disconnect the battery before performing maintenance.
  • Ensure that the connection cables are provided with fuses and circuit breakers; never replace a protective device with a different type.
  • When connecting battery cables, use a torque wrench with an insulated box spanner to avoid shorting the battery.
  • Ensure that the available voltage source conforms to the configuration settings of the product.

Try it with your setup

What it runs

Against 2400 W continuous and 6000 W surge, one appliance at a time.

Laptop charger65 WRuns
Starlink dish75 WRuns
230 V compressor fridge100 WRuns
Corded power drill600 WRuns
Hair dryer1200 WRuns
Microwave (input power)1200 WRuns
Pod coffee machine1400 WRuns
Induction hob, one zone2000 WRuns
Kettle2000 WRuns

Start-up draw from the appliance type: compressor fridges pull about 5× their running power, motors 3×, pumps 4×.

Size an inverter for several appliances at once →

Wiring it in

Current, fuse and cable size for the MultiPlus 12/3000/120-50 120V Inverter/Charger (PMP123021102) at full rated power.

Battery → inverter

DC input · 12 V
Current at rated power
215.1 A
Start-up surge
537.6 A
Fuse
300 A Class T
Cable run (one way)CableVoltage drop
1 m185 mm² · 350 MCM0.3 %
2 m185 mm² · 350 MCM0.7 %
3 m185 mm² · 350 MCM1 %
5 m185 mm² · 350 MCM1.7 %
Other length or voltage? Open the wire gauge calculator →

Copper cable at 20 °C, positive and negative conductor, at most 3 % voltage drop. The cable is always rated for the fuse that protects it, and the fuse is sized at 125 % of the current. Input current assumes 93 % conversion efficiency. If the manufacturer manual specifies a fuse or cable, follow the manual.

Technical data

Input voltage range (V DC)9.5 – 17
Output voltage120 VAC ± 2%
Frequency60 Hz ± 0.1%
Cont. output power at 25°C / 77°F (VA)3000
Cont. output power at 25°C / 77°F (W)2400
Cont. output power at 40°C / 104°F (W)2200
Cont. output power at 65°C / 150°F (W)1700
Peak power (W)6000
Maximum efficiency (%)93
Zero-load power (W)20
Charge voltage 'absorption' (V DC)14.4
Charge voltage 'float' (V DC)13.8
Storage mode (V DC)13.2
Charge current house battery (A)120
Charge current starter battery (A)4
Maximum feed through current (A)50
Weight (kg)19
Dimensions (hxwxd in mm)362 x 258 x 218

Ratings & reviews

No ratings yet — be the first to rate this component.

Sign in to rate and comment
Free account — also saves your wiring diagrams.

Drop the MultiPlus 12/3000/120-50 120V Inverter/Charger (PMP123021102) into your wiring diagram

VoltPlan sizes the cables, picks the fuses and checks the voltages for every component you connect around it.