In library12V 20A AC-to-DC LiFePO4 Battery Charger (RBC20A1P)
The Renogy 12V 20A AC-to-DC LiFePO4 Battery Charger (RBC20A1P) is a portable automatic charger designed for 12.8V LiFePO4 batteries. It features a 3-stage intelligent charging design and multiple protection functions for safe and efficient charging.
We earn a small commission on purchases through this link. It does not change what you pay and never affects ratings.
Safety notes for this component
- Ensure that the LiFePO4 batteries include a PCM/BMS when using this charger.
- Connect the positive alligator clip to the positive terminal and the negative clip to the negative terminal on the LFP battery.
- LFP batteries should not be charged below 0℃ /32℉, otherwise the BMS cuts off charging.
- When connecting the charger, always connect the negative terminal before the positive terminal.
Try it with your setup
How long it takes to charge
At 20 A into a 12 V bank, hours on shore power from 20 % to full.
| 100 Ah bank | 4.4 h |
| 200 Ah bank | 8.8 h |
| 300 Ah bank | 13.3 h |
| — |
Datasheet charge current, charge losses and the absorption phase included.
Fine-tune in the charge time calculator →Wiring it in
Current, fuse and cable size for the 12V 20A AC-to-DC LiFePO4 Battery Charger (RBC20A1P) at full rated power.
Charger → battery
DC output · 12 V| Cable run (one way) | Cable | Voltage drop |
|---|---|---|
| 1 m | 4 mm² · 12 AWG | 1.5 % |
| 2 m | 4 mm² · 12 AWG | 3 % |
| 3 m | 6 mm² · 10 AWG | 3 % |
| 5 m | 10 mm² · 8 AWG | 3 % |
Copper cable at 20 °C, positive and negative conductor, at most 3 % voltage drop. The cable is always rated for the fuse that protects it, and the fuse is sized at 125 % of the current. If the manufacturer manual specifies a fuse or cable, follow the manual.
Technical data
Alternatives

- Charge current
- 20 A
- PV input
- up to 100 V
- Output
- 12 V DC

- Charge current
- 20 A
- PV input
- up to 95 V
- Output
- 12 V DC

- Charge current
- 30 A
- PV input
- up to 100 V
- Output
- 12 V DC
- Charge current
- 30 A
- Input
- 12 V DC
- Output
- 12 V DC
Ratings & reviews
No ratings yet — be the first to rate this component.
Drop the 12V 20A AC-to-DC LiFePO4 Battery Charger (RBC20A1P) into your wiring diagram
VoltPlan sizes the cables, picks the fuses and checks the voltages for every component you connect around it.