In librarySmartSolar MPPT 100/20
20 A MPPT charge controller for 12 V and 24 V banks with 100 V PV input. The smaller sibling of the 100/30 — same Bluetooth app and charge profiles, sized for roofs up to 290 W at 12 V.
We earn a small commission on purchases through this link. It does not change what you pay and never affects ratings.
among the dearest of 4 solar charge controllers in the catalogue (€3–€5 per amp).
Estimated street price; the shop shows today's price.
Try it with your setup
How long it takes to charge
At 20 A into a 12 V bank, hours of full sun from 20 % to full.
| 100 Ah bank | 4.4 h |
| 200 Ah bank | 8.8 h |
| 300 Ah bank | 13.3 h |
| — |
Datasheet charge current, charge losses and the absorption phase included. Reaching 20 A takes roughly 240 W of panel output; smaller arrays charge proportionally slower.
Fine-tune in the charge time calculator →Wiring it in
Current, fuse and cable size for the SmartSolar MPPT 100/20 at full rated power.
Charger → battery
DC output · 12 V| Cable run (one way) | Cable | Voltage drop |
|---|---|---|
| 1 m | 4 mm² · 12 AWG | 1.5 % |
| 2 m | 4 mm² · 12 AWG | 3 % |
| 3 m | 6 mm² · 10 AWG | 3 % |
| 5 m | 10 mm² · 8 AWG | 3 % |
Copper cable at 20 °C, positive and negative conductor, at most 3 % voltage drop. The cable is always rated for the fuse that protects it, and the fuse is sized at 125 % of the current. If the manufacturer manual specifies a fuse or cable, follow the manual.
Technical data
Works with
Verified in VoltPlan diagramsAlternatives

- Charge current
- 20 A
- Input
- 230 V AC
- Output
- 12 V DC

- Charge current
- 20 A
- PV input
- up to 95 V
- Output
- 12 V DC

- Charge current
- 30 A
- PV input
- up to 100 V
- Output
- 12 V DC
- Charge current
- 30 A
- Input
- 12 V DC
- Output
- 12 V DC
Ratings & reviews
Drop the SmartSolar MPPT 100/20 into your wiring diagram
VoltPlan sizes the cables, picks the fuses and checks the voltages for every component you connect around it.