It's even better as an app.$3.99 $1.99 · Pay once, no subscriptionDownload on the App Store
Orion-Tr Smart 12/12-30 Isolated DC-DC Charger
Victron

Orion-Tr Smart 12/12-30 Isolated DC-DC Charger

The Victron Orion-Tr Smart 12/12-30 Isolated is a galvanically isolated DC-DC charger that charges a 12 V house battery from the alternator with 30 A, 360 W continuous at 40 °C. Input and output are isolated with 200 V DC, which suits boats and separate ground systems. Set-up runs over Bluetooth via VictronConnect.

Buy — affiliate linkAdd to my wiring diagram

We earn a small commission on purchases through this link. It does not change what you pay and never affects ratings.

Charge current
30 A
Input
12 V DC
Output
12 V DC
!

Safety notes for this component

  • The isolated version only isolates if the two negatives are not joined elsewhere; check the ground wiring before relying on it.
  • At full output the charger draws about 35 A from the input; size the input cable and fuse for that, not for 30 A.

Try it with your setup

How long it takes to charge

At 30 A into a 12 V bank, hours of driving from 20 % to full.

100 Ah bank2.9 h
200 Ah bank5.9 h
300 Ah bank8.8 h
—

Datasheet charge current, charge losses and the absorption phase included.

Fine-tune in the charge time calculator →

Wiring it in

Current, fuse and cable size for the Orion-Tr Smart 12/12-30 Isolated DC-DC Charger at full rated power.

Supply → charger

DC input · 12 V
Current at rated power
34.5 A
Fuse
50 A MAXI Blade
Cable run (one way)CableVoltage drop
1 m10 mm² · 8 AWG1 %
2 m10 mm² · 8 AWG2 %
3 m16 mm² · 6 AWG1.9 %
5 m25 mm² · 4 AWG2.1 %
Other length or voltage? Open the wire gauge calculator →

Charger → battery

DC output · 12 V
Rated charge current
30 A
Fuse
40 A MAXI Blade
Cable run (one way)CableVoltage drop
1 m10 mm² · 8 AWG0.9 %
2 m10 mm² · 8 AWG1.8 %
3 m10 mm² · 8 AWG2.7 %
5 m16 mm² · 6 AWG2.8 %
Other length or voltage? Open the wire gauge calculator →

Copper cable at 20 °C, positive and negative conductor, at most 3 % voltage drop. The cable is always rated for the fuse that protects it, and the fuse is sized at 125 % of the current. Input current assumes 87 % conversion efficiency. If the manufacturer manual specifies a fuse or cable, follow the manual.

Technical data

Input voltage range8-17 V
Output voltage adjust range10-15 V
Continuous output current at 40 °C30 A
Maximum output current (10 s)40 A
Continuous output power360 W at 40 °C, 430 W at 25 °C
Efficiency87 %
Galvanic isolation200 V DC between input, output and case
No-load input current< 80 mA
Operating temperature-20 to +55 °C (derating 3 %/°C above 40 °C)
Maximum cable cross-section16 mm² (AWG 6)
Weight1.8 kg
Dimensions (h x w x d)130 x 186 x 80 mm

Ratings & reviews

No ratings yet — be the first to rate this component.

Sign in to rate and comment
Free account — also saves your wiring diagrams.

Drop the Orion-Tr Smart 12/12-30 Isolated DC-DC Charger into your wiring diagram

VoltPlan sizes the cables, picks the fuses and checks the voltages for every component you connect around it.