It's even better as an app.$3.99 $1.99 · Pay once, no subscriptionDownload on the App Store
Renogy Rover 40A MPPT Charge ControllerIn library
Renogy

Renogy Rover 40A MPPT Charge Controller

The Renogy Rover 40A MPPT Solar Charge Controller is designed for 12V/24V systems. It features MPPT (Maximum Power Point Tracking) technology to optimize solar energy harvesting. The controller has a rated charge current of 40A and a maximum solar input power of 520W for 12V systems and 1040W for 24V systems.

★★★★★5.01 rating
Buy — affiliate linkAdd to my wiring diagram

We earn a small commission on purchases through this link. It does not change what you pay and never affects ratings.

Charge current
40 A
PV input
up to 100 V
Output
12 V DC
Price check
≈ €120€3 per amp

among the cheapest of 4 solar charge controllers in the catalogue (€3–€5 per amp).

Estimated street price; the shop shows today's price.

!

Safety notes for this component

  • Always connect the battery to the charge controller first before connecting the solar panel array.
  • Ensure the solar panel array's open-circuit voltage (Voc) does not exceed 100 VDC.
  • Do not connect any inverters or battery chargers into the LOAD TERMINAL of the charge controller.
  • It is recommended to install a 40A ANL fuse between the charge controller and the batteries.

Try it with your setup

How long it takes to charge

At 40 A into a 12 V bank, hours of full sun from 20 % to full.

100 Ah bank2.2 h
200 Ah bank4.4 h
300 Ah bank6.6 h
—

Datasheet charge current, charge losses and the absorption phase included. Reaching 40 A takes roughly 480 W of panel output; smaller arrays charge proportionally slower.

Fine-tune in the charge time calculator →

Wiring it in

Current, fuse and cable size for the Renogy Rover 40A MPPT Charge Controller at full rated power.

Charger → battery

DC output · 12 V
Rated charge current
40 A
Fuse
50 A MAXI Blade
Cable run (one way)CableVoltage drop
1 m10 mm² · 8 AWG1.2 %
2 m10 mm² · 8 AWG2.4 %
3 m16 mm² · 6 AWG2.2 %
5 m25 mm² · 4 AWG2.4 %
Other length or voltage? Open the wire gauge calculator →

Copper cable at 20 °C, positive and negative conductor, at most 3 % voltage drop. The cable is always rated for the fuse that protects it, and the fuse is sized at 125 % of the current. If the manufacturer manual specifies a fuse or cable, follow the manual.

Technical data

Nominal System Voltage12/24V Auto-Detect
Rated Charge Current40A
Max. PV Input Power (12V)520W
Max. PV Input Power (24V)1040W
Max. Solar Input Voltage (Voc)100V DC
Solar Input Voltage Range (Voc)15VDC~100VDC
Battery Input Voltage Range10VDC~32VDC
Rated Load Charge Current20A
MPPT Tracking Efficiency>99%
Conversion Efficiency<98%
Charger Efficiency>95%
Operating Temperature Range-35℃ to 45℃
Wire Size8 AWG to 12 AWG

Ratings & reviews

5.0
★★★★★
1 rating
5 ★1
4 ★0
3 ★0
2 ★0
1 ★0
Sign in to rate and comment
Free account — also saves your wiring diagrams.
SStefan★★★★★2 months ago

Drop the Renogy Rover 40A MPPT Charge Controller into your wiring diagram

VoltPlan sizes the cables, picks the fuses and checks the voltages for every component you connect around it.