Lithium XS 12V 5A LiFePO4 Battery Charger
A 5 A charger made for 12 V LiFePO4 batteries: charges 5 to 60 Ah, maintains up to 120 Ah. It resets a battery whose low-voltage protection has tripped, tests whether the battery holds its charge and has a maintenance stage for long idle periods. Suits a lithium starter battery or a small house battery; large camper banks need a bigger charger.
We earn a small commission on purchases through this link. It does not change what you pay and never affects ratings.
Safety notes for this component
- For 12 V LiFePO4 only; do not use it on lead-acid batteries.
- Do not charge a LiFePO4 battery below its minimum charge temperature (often 0 °C); check the battery's datasheet before leaving the charger connected in a cold vehicle.
Try it with your setup
How long it takes to charge
At 5 A into a 12 V bank, hours on shore power from 20 % to full.
| 100 Ah bank | 17.7 h |
| 200 Ah bank | 35.4 h |
| 300 Ah bank | 2.2 days |
| — |
Datasheet charge current, charge losses and the absorption phase included.
Fine-tune in the charge time calculator →Wiring it in
Current, fuse and cable size for the Lithium XS 12V 5A LiFePO4 Battery Charger at full rated power.
Charger → battery
DC output · 12 V| Cable run (one way) | Cable | Voltage drop |
|---|---|---|
| 1 m | 1 mm² · 16 AWG | 1.5 % |
| 2 m | 1 mm² · 16 AWG | 3 % |
| 3 m | 1.5 mm² · 14 AWG | 3 % |
| 5 m | 2.5 mm² · 13 AWG | 3 % |
Copper cable at 20 °C, positive and negative conductor, at most 3 % voltage drop. The cable is always rated for the fuse that protects it, and the fuse is sized at 125 % of the current. If the manufacturer manual specifies a fuse or cable, follow the manual.
Technical data
Alternatives

- Charge current
- 5 A
- Input
- 230 V AC
- Output
- 12 V DC

- Charge current
- 10 A
- Input
- 230 V AC
- Output
- 12 V DC

- Charge current
- 10 A
- Input
- 230 V AC
- Output
- 12 V DC

- Charge current
- 20 A
- PV input
- up to 100 V
- Output
- 12 V DC
Ratings & reviews
No ratings yet — be the first to rate this component.
Drop the Lithium XS 12V 5A LiFePO4 Battery Charger into your wiring diagram
VoltPlan sizes the cables, picks the fuses and checks the voltages for every component you connect around it.