It's even better as an app.$3.99 $1.99 · Pay once, no subscriptionDownload on the App Store
MXS 5.0 12V 5A Battery Charger and MaintainerIn library
CTEK

MXS 5.0 12V 5A Battery Charger and Maintainer

The CTEK MXS 5.0 is a 12V battery charger and maintainer with a maximum output of 5A. It features an 8-step charging cycle, automatic temperature compensation, and programs for various battery types including AGM and deeply discharged batteries.

Buy — affiliate linkAdd to my wiring diagram

We earn a small commission on purchases through this link. It does not change what you pay and never affects ratings.

Charge current
5 A
Input
230 V AC
Output
12 V DC
!

Safety notes for this component

  • Ensure the mains cable is disconnected from the wall outlet before connecting or disconnecting the battery clamps to/from the battery.
  • The battery terminal that is not connected to the chassis has to be connected first. The other connection is to be made to the chassis, remote from the battery and fuel line.
  • Always check that the charger has switched to ‘STEP 7’ before leaving the charger unattended and connected for long periods.
  • If the battery clamps are incorrectly connected, the reverse polarity protection will ensure that the battery and charger are not damaged.

Try it with your setup

How long it takes to charge

At 5 A into a 12 V bank, hours on shore power from 20 % to full.

100 Ah bank17.7 h
200 Ah bank35.4 h
300 Ah bank2.2 days
—

Datasheet charge current, charge losses and the absorption phase included.

Fine-tune in the charge time calculator →

Wiring it in

Current, fuse and cable size for the MXS 5.0 12V 5A Battery Charger and Maintainer at full rated power.

Charger → battery

DC output · 12 V
Rated charge current
5 A
Fuse
7.5 A Blade (ATC/ATO)
Cable run (one way)CableVoltage drop
1 m1 mm² · 16 AWG1.5 %
2 m1 mm² · 16 AWG3 %
3 m1.5 mm² · 14 AWG3 %
5 m2.5 mm² · 13 AWG3 %
Other length or voltage? Open the wire gauge calculator →

Copper cable at 20 °C, positive and negative conductor, at most 3 % voltage drop. The cable is always rated for the fuse that protects it, and the fuse is sized at 125 % of the current. If the manufacturer manual specifies a fuse or cable, follow the manual.

Technical data

Model Number1075
Input220–240 VAC, 50-60 Hz
Charging Voltage14.4V, AGM 14.7V, RECOND 15.8V
Min Battery Voltage2.0V
Charge Current0.8A Max, 5A Max
Current, Mains0.6A rms (at full charging current)
Back Current Drain<1Ah/month
RippleLess than 4 %
Ambient Operating Temperature+5°C to +50°C
Charger Type8 step, fully automatic charging cycle
Battery TypesAll types of 12V lead-acid batteries (WET, MF, Ca/Ca, EFB, AGM and GEL)
Battery Capacity1.2–110Ah
Ingress ProtectionIP65
Temperature CompensationBuilt in charge voltage compensation according to ambient temperature
Warranty5 years

Ratings & reviews

No ratings yet — be the first to rate this component.

Sign in to rate and comment
Free account — also saves your wiring diagrams.

Drop the MXS 5.0 12V 5A Battery Charger and Maintainer into your wiring diagram

VoltPlan sizes the cables, picks the fuses and checks the voltages for every component you connect around it.