In libraryGENIUS10 6V/12V 10A Smart Battery Charger
The NOCO GENIUS10 is a 10A smart battery charger and maintainer for 6V and 12V lead-acid and lithium-ion batteries. It can charge batteries as low as 1-volt and features a Force Mode for batteries down to 0-volts. The charger is suitable for automotive, marine, and deep-cycle applications.
We earn a small commission on purchases through this link. It does not change what you pay and never affects ratings.
Safety notes for this component
- When installing in a negative-ground vehicle, connect the black return lead to a substantial chassis or engine-ground point away from the battery.
- Complete DC connections before plugging into AC power.
- Disconnect AC power before disconnecting DC leads.
- Do not attempt to charge a damaged or frozen battery.
- Only use with batteries of recommended voltage; do not attempt to use with other chemistries.
Try it with your setup
How long it takes to charge
At 10 A into a 12 V bank, hours on shore power from 20 % to full.
| 100 Ah bank | 8.8 h |
| 200 Ah bank | 17.7 h |
| 300 Ah bank | 26.5 h |
| — |
Datasheet charge current, charge losses and the absorption phase included.
Fine-tune in the charge time calculator →Wiring it in
Current, fuse and cable size for the GENIUS10 6V/12V 10A Smart Battery Charger at full rated power.
Charger → battery
DC output · 12 V| Cable run (one way) | Cable | Voltage drop |
|---|---|---|
| 1 m | 1.5 mm² · 14 AWG | 2 % |
| 2 m | 2.5 mm² · 13 AWG | 2.4 % |
| 3 m | 4 mm² · 12 AWG | 2.2 % |
| 5 m | 6 mm² · 10 AWG | 2.5 % |
Copper cable at 20 °C, positive and negative conductor, at most 3 % voltage drop. The cable is always rated for the fuse that protects it, and the fuse is sized at 125 % of the current. If the manufacturer manual specifies a fuse or cable, follow the manual.
Technical data
Alternatives

- Charge current
- 10 A
- Input
- 230 V AC
- Output
- 12 V DC

- Charge current
- 20 A
- PV input
- up to 100 V
- Output
- 12 V DC

- Charge current
- 20 A
- Input
- 230 V AC
- Output
- 12 V DC
- Charge current
- 5 A
- Input
- 230 V AC
- Output
- 12 V DC
Ratings & reviews
No ratings yet — be the first to rate this component.
Drop the GENIUS10 6V/12V 10A Smart Battery Charger into your wiring diagram
VoltPlan sizes the cables, picks the fuses and checks the voltages for every component you connect around it.